Saturday, December 30, 2017

Minor rant about hard-to-rig windsurf sails

First let me say that I am in awe of modern sail designers. Windsurf sails of this century are beautifully-shaped, three-dimensional wings that deliver crisp, controllable power over a wide range of wind and water conditions. And even within this century, sails have continued to improve. For example, I used to have a 2008 model year Aerotech Phantom 6.8 m2 sail, which I recently replaced with a 2015(?) model year Aerotech Phantom 6.8 m2 sail. The latter was equal in power, but significantly more stable, lighter weight, easier to power on/off, and more aerodynamically efficient for sailing at a variety angles to the wind.

However, the new sail has a feature that I find aggravating as heck, which contributed to my breaking the attachment head for my favorite boom while struggling to rig up the sail today. That feature is actually a combination of two aggravating features that work in concert to be extra aggravating. #1 is the tight mast sleeve and stiff-edged sail cloth in the boom-cutout area. #2 is the protruding batten end smack in the middle of the boom cutout. (Exhibit A)

Exhibit A- The offending boom-cutout area of the Aerotech Phantom 6.8


Every time I've rigged the sail it has been a major headache to snap the boom head onto the mast because the stiff, tight sailcloth and inconveniently-placed batten in the boom cutout effectively block it. The effect is worsened by the rubber shim that I must use to adapt the skinny diameter mast to my wide diameter Fiberspar brand boom clamp. The semi-stiff carbon-fiber-plastic-composite Fiberspar boom clamp may have been a particularly bad clamp to use with this awkward sail sleeve. I wasn't surprised that it broke; just bummed because it was the only boom I had that would fit my 6.8 m2 and 8.0 m2 sails, and I don't have any money to replace it now because my wife's and my motor vehicles also keep expensively breaking.

Exhibit B- the busted boom clamp.

No comments: